/ One-component room temperature fixing adhesive

One-component room temperature fixing adhesive

One-component room temperature curing silicone is a one-component silicone material that requires no additional curing agent and can cure at room temperature upon contact with air by absorbing moisture from the air.

Product Description

Core Features:

Combines excellent heat resistance and weather resistance with the flexibility and adhesion of organic materials; the curing process produces no by-products and has extremely low shrinkage; after curing, it becomes an elastomer that can operate stably over the long term within a temperature range of -60℃ to 200℃.

Typical Application Scenarios

? Electronics and Electrical Industry

Used for bonding and fixing electronic components on circuit boards and sealing against moisture, such as positioning capacitors, resistors, and sensors, preventing components from falling off due to vibration or short-circuiting due to moisture;

? Automotive Manufacturing Field

Used for sealing automotive headlights to prevent rainwater and dust from entering the lamp housing;

Bonding and fixing automotive interior parts and wiring harnesses, buffering vibration during vehicle operation, and reducing abnormal noise.

Related Products

Conformal coating

Conformal coating is a special protective coating applied to the surface of printed circuit boards (PCBs) and components. Its core function is to form a transparent or translucent thin film on the surface of the circuit board, thereby providing "three-proof" protection for electronic assemblies. This thin film can effectively resist moisture condensation, acid, alkali, and salt corrosion, fungal growth, as well as a certain degree of dust contamination and chemical erosion, greatly improving the reliability and service life of electronic equipment in harsh environments.

Thermal conductive silicone grease

Thermal conductive silicone grease is a paste-like thermal interface material made by grinding and mixing specialty silicone oil as the base oil with high-thermal-conductivity, high-temperature-resistant inorganic fillers. Its basic design logic is not to rely on itself to become the main heat conduction body, but rather to use its soft paste form, under assembly pressure, to fully fill the microscopic depressions and gaps invisible to the naked eye between the heat-generating component and the heat sink, squeezing out the air, whose thermal conductivity is only about 0.026 W/(m·K), and establishing an efficient heat transfer path through the material's own thermal conductivity, thereby greatly reducing the interfacial contact thermal resistance.

Silicone gel

Silicone gel is a very unique organosilicon material. After cross-linking and curing, it forms a quasi-solid gel that is softer than ordinary silicone and has a naturally tacky surface. You can think of it as a substance between jelly and modeling clay, and after curing it can even self-repair. In terms of chemical composition, it is usually also composed of two-component addition-cure silicone, A and B, with no small molecule release during curing and extremely low volume shrinkage. Its most core characteristic lies in its extremely low cross-link density.

Two-component condensation-type potting adhesive

Two-component condensation-type potting adhesive consists of Part A (base adhesive) and Part B (curing agent), which are mixed evenly in a certain proportion before use.